Design Engineer Intern – EE Systems

Virya Autonomous Technologies · Bengaluru, Karnataka, India

Posted 19 Nov 2026 · Internship

Apply on LinkedIn

Role Overview

As a Design Engineer Intern – EE Systems at Virya Autonomous, you will support the design and development of electrical/electronic systems for next-generation autonomous material and people mobility platforms. Working alongside the EE systems team, you will get hands-on exposure to wiring harnesses, LV power architecture, CAN communication, and vehicle-level integration, while interacting with vendors, systems engineering, safety and manufacturing teams. This is an onsite role based in Bangalore.


Responsibilities

  • Support the design, packaging, and integration of electrical components, subsystems, and wiring harnesses for autonomous mobility platforms.
  • Assist in developing LV power and communication architecture diagrams, including fusing, protection, and grounding schemes.
  • Create and update wiring schematics, harness drawings, connector pinouts, and BOMs in coordination with design and mechanical engineers.
  • Perform wire sizing, voltage drop, and fuse rating calculations under the guidance of senior engineers.
  • Support component selection by comparing datasheets for connectors, cables, relays, contactors, fuses, and DC-DC converters.
  • Assist in bench testing, harness continuity and insulation checks, and vehicle-level validation, and document test results.
  • Support failure mode analysis (DFMEA) and troubleshooting of electrical issues on prototypes and field units.
  • Collaborate with mechanical and software teams during prototype builds and system integration.


Qualifications

  • Currently enrolled in a B.E./B.Tech or M.E./M.Tech program in Electrical, Electrical & Electronics, or Electronics Engineering. Graduates are not eligible.
  • Strong fundamentals in circuit analysis, DC power distribution, and power electronics, with a basic understanding of batteries, motors, and motor controllers.
  • Exposure to wiring harnesses, schematics, or electrical drawings through coursework, projects, or student teams (Formula Student, SAE BAJA, robotics clubs) is a plus.
  • Familiarity with design tools like AutoCAD or SolidWorks Electrical, and hands-on use of multimeters, oscilloscopes, DC power supplies, soldering, and crimping.
  • Basic knowledge of CAN, Ethernet, and Modbus, MATLAB/Simulink, and industry standards (ISO, IEC, UL) is preferred.
  • Eagerness to learn, good documentation habits, and ability to work in cross-functional, fast-paced environments.